Evening in the Garden Quilts

Adventures in Fabric Art

Machine Binding Tutorial

8 Comments

IMG_1589

I am a big fan of machine quilt bindings, but I haven’t seen any I like as well as mine.  Talking on Twitter, it seems that many people are doing something similar with decorative stitches (which can be really fun in certain applications), but I really like my blind stitched bindings.  They look close to hand stitched, but are so much faster, and stronger, than hand work.  Not to mention that I am far too impatient for much hand work these days.  So little time, so many quilts to make!

IMG_1562

I usually use straight grain binding (better use of fabric, less stretchy), but this works with bias binding, too.  It will just be a little stretchier and need a little more coaxing into place.  I accidentally combined both in a scrappy binding recently, and it turned out fine.

IMG_1561

Any width binding would work, but I use 2″ strips of fabric, folded in half, sewn with a quarter inch seam, to form a narrow, tight binding.  I join, press and sew the binding in the standard way (here’s a very clear Heather Bailey tutorial), except that I sew it to the back of the quilt.  I’ve already basted the quilt edges during the quilting, so they are very stable.  Therefore, I use a 1/4″ foot (Bernina 37) to sew on the binding.  I’ve used a walking foot, and it works, but I have trouble getting a consistent 1/4″ with it.  Use what works for you.

IMG_1564

After attaching the binding to the quilt back, be sure to press the binding back over the seam (the way the finished binding will be).

At this point, I’m ready to change my machine to a blind stitch, so I switch to a wide, open toe foot (#20).  Again, a walking foot or binding foot works.  Also, make sure to change your throat plate if necessary to the one that allows zigzag, etc.  Don’t ask me how I know this…

IMG_1566

I set up my Bernina to look like this.  I choose the blind stitch, reverse it, reduce the width to less than 1 (very narrow, barely bites the binding), and reduce the length.  I use a thin (60 wt.) thread like Superior’s Bottom Line.  Invisible thread is good, too, but it drives me a little crazy because I can’t see it.  I use it when I have a really large contrast between quilt and binding color.

IMG_1569

Then, from the front, I fold the binding into place, the edge just covering the 1/4″ stitching line showing through from the first sewing.  I start in the middle of a side.  The trick is to keep the stitching on the quilt, alongside the binding, very close to the folded edge of the binding, so that every few stitches the needle jumps over and nips the binding.  You may have moments when this fails and the needle misses the binding, leaving a gap.  This is easily fixed later.  If you see it happening, mark it with a pin and try harder to do better with the rest.

IMG_1570

At this point, remove the cat from your quilt.

IMG_1572

As you approach the corner, insert a pin about 3/4″ from the end to keep the binding in place.

IMG_1573

Fold to form your miter, then pin that in place.  Sew to the miter, taking a stitch into the new side of binding.  Remove pins and turn the quilt for the new side.  I usually take a back stitch into the binding of the previous side to make sure the corner is really secure.  Then resume attaching binding to the new side.  Three more corners, and you are finished!

IMG_1575

When you examine your work you are going to find gaps where you didn’t catch the binding.  Just go back and go over these before you reset your machine.  I tried to find one of these gaps for a photo, but for the first time I didn’t have any!  I find it varies a lot, probably having to do with how tired I am, and also the texture of the binding fabric.  Don’t despair if you have several to fix.

IMG_1576

The back will look like this, with a slightly visible line of stitching alongside the binding.  After washing and crinkling, this becomes even less noticeable.

IMG_1571

Now get going and finish those quilts!

I’m linking up with Really Random Thursday at Live a Colorful Life.

Advertisements

Author: Valerie

I'm Valerie, also known as Scooquilt. I am passionate about fabric and quilting. My quilts are colorful and modern, but grounded in traditional blocks. My degrees are in Fine Arts and Education. I'm retired from teaching and trying to quilt daily. Reading, gardening, and cats are also important to me.

8 thoughts on “Machine Binding Tutorial

  1. Hi Valerie,
    I haven’t tried using a blind stitch for binding. I usually machine stitch to the front and hand stitch to the back. Might have to try this. Thanks for sharing! Found your blog through Really Random thursday!
    Have fun
    Jan

  2. Pingback: Finish It Up Friday: Pink and Gray Donation Quilt | Evening in the Garden Quilts

  3. Pinning this for future reference. Thanks!

  4. I sew my binding on almost the same way you do…but I never use pins, I just fold as I go. I just might have to try it your way next time!

  5. Thank you Valerie, I pinned your tutorial on my board :))) The corner trick is really neat. I have to start pinning the opposite way…

  6. “At this point, remove the cat from your quilt.” Hahahahahah! Thanks for the laugh Valerie!
    Your technique is fascinating and one I’d like to try. The results in your photos speak for themselves!

  7. This seems so simple and basic. Why didn’t I know about this sooner. There needs to be a book, 100 Different Ways to Do Binding. This should be number one.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s